KAMRAN DEHGHANI - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

KAMRAN DEHGHANI

Professor
Department of Materials and Metallurgical Engineering
Manufacturing Processes

Download PDF فارسی

Email:

dehghani

aut.ac.ir

Phone:

h-index (Scopus):

38.00

Citations (Scopus):

4566

Supervised PhD Theses

Thesis title

Date

Biocompatible and wear behavior of Ti35 Nb25 Zr15 Mo15 Ta10 high antropy alloy

ELHAM RAJABITOUTKABONI

2024 Dec

corrosion and biocompatible properties of Ti35Nb25Zr15Mo15V10 high antropy alloy

MEHRANGIZ RAJABI TOOTKABONI

2024 Nov

Dynamic Hall-Petch Characterization in non-equiatomic CrCuFeMnNi High Entropy Alloy

MAJID VAGHARI

2024 Jun

Self-healing of copper-beryllium alloys by precipitation

DAAVOOD MIRAHMADI KHAKI
Other Supervisor: Ali Shamsipoor

2024 May

Evaluation of Nanomechanical Properties of Tantalum Nitride Thin Film fabricated by Activated Magnetron Sputtering

SEYED SIAVASH FIROUZABADI
Other Supervisor: MALEK NADERI

2017 Jun

An Investigation to Deformation Behavior and Texture Evolution During the Cold Rolling and Annealing of Al0.3CoCrFeNi High Entropy Alloy

SAEED MOEMENI

2025 Jul

Supervised MSc Theses

Thesis title

Date

Investigating the effect of surface quality on the hydrophobicity of ALCrFeMnTi high entropy alloy

RAMTIN HAJIZADEH

2024 Oct

Synthesis of high entropy oxides for use in lithium-ion batteries

KIYAN KARAMI

2024 Feb

An Investigation Of Hydrophilic And Hydrophobic Properties Of High Entropy Alloy Al0.5CoCrFeNi

MARZIEH ALKALI

2023 Aug

Effect Of Nano-Magnesium Oxide Addition On Corrosion Behavior Of Galvalume Coating

SEYED REZA SIASI RAD

2023 Mar

Investigation of heterogeneity in rolling of Al0.3CoCrFeNi high entropy alloy sheet using crystal plasticity

AMIRHOSSEIN HOSSEINIFAR

2023 Feb

Production of surface nano-composite in AlCoCrFeNi2.1 high entropy alloy with addition of SiC nano-particles and by friction stir processing

SEYED ALI ERFANI MOBARAKEH

2021 Sep

Investigation of superplastic behavior of high entropy alloy CoCrFeNi2.1

MEHRAB SEYFPOOR BYJNAVANDI

2021 Sep

FSP of AlCoCrFeNi2.1 High Entropy Alloy

TARANOM SEYEDHOSSEINI

2021 Apr

Aging behavior of high entropy alloy AlCoCrFeNi

ARMIN GHADERI

2020 Feb

Joining the AlCoCrFeNi Entropy Alloy by Friction stir welding

HOSSEIN MOGHANNI ALGHALANDIS

2020 Feb

Investigating the interface coherency of ferrite & martensite in dual phase steels

NIMA AHMADKHANI
Other Supervisor: ALI NIKBAKHT

2019 May

Effect of process parameters on permeability and mechanical properties of Stainless Steel 316L Filters

HAMED GHOLAMZADEH & Nader Parvin
Other Supervisor:

2019 Apr

Simulation of material flow in Friction Stir Welding of Stainless Steel 321 & Incoloy 825

NAVID SAFARA
Other Supervisor: Ali Shamsipoor

2019 Jan

Fabrication of Superhydrophobic Property on The Titanium Foil and Evaluation of Wettability

MASOUD MIRZADEH

2018 Feb

Preparation of hydrophobic on glass and evaluation of its wetalility

ZAHRAA KAREEM MURAD AL-RUBAYE

2017 Oct

Study of the mechanical properties of FSW of HSLA-70 steels by using Ti Oxide

NADER MASTOORI

2017 Mar

Manufacturing of Al/B4C nano composite by consolidation of powders using accumulative back extrusion

TINA MOHAMMADHASSAN

2017 Feb

joining polypropylene to AA5052 aluminum alloy by FSW

BEHNAM ABDOLALIPOUR ASLJANI
Other Supervisor: SEYED EHSAN MIRSALEHI

2017 Jan

Development of failure assessment diagrams for AA5083 nano composite welds produced by friction stir welding

BEHROOZ RAHMATIAN & SEYED EHSAN MIRSALEHI
Other Supervisor:

2017 Jan

Friction stir welding of dissimilar Al and Mg alloys with addition of nanoparticles

NIMA SHARIFI ASL & SEYED EHSAN MIRSALEHI
Other Supervisor:

2016 Feb

Friction stir welding of amorphous polymer to enhance the formation of Nano-Crystalit

ALIREZA ABOLGHASEMI

2016 Feb

Fracture Toughness Measurement of CTOD samples of HSLA and QT (A517) steel weldments

ADEL FARAHMAND BOROUJENI

2016 Feb

combination of FSP and FSW to producing nanocomposite AZ31 and AA5086

SINA MIRAGHAIE
Other Supervisor: SEYED EHSAN MIRSALEHI

2016 Jan

Investigation of the effect of service temperature on fatigue failure of railway rail thermit weld

SIROUS SAYAHI SAHARKHIZ

2015 Oct

Wear and Corrosion Properties of Diamond-Like Carbon (DLC) Coating Produced on AISI 410 Martensitic Stainless Steel for oilfield Gate valves

MAZIAR JOKARI SHESHDEH & Farzad Mahboubi
Other Supervisor:

2015 Oct

Dissimilar friction stir welding oftitanium and 316 stainless steel

AMIR ABBAS MOHAMMAD GHASSEMI

2015 Feb

simulation of strain and strain rate in friction stir processing of aluminium 6061

KOMEYL DALAEI

2015 Feb

Investigation of grain growth during friction stir processing of cu and simulation by MD

HESAM AZIZI VARZEGHANI

2014 Oct

friction stir spot welding of IF steel with incorprating SIC nano particles

SEYEDEH FATEMEH TEBYANI

2014 Sep

Analysis of solidification crack and liquation crack in the welding process of stainless steel 304

MOHAMMAD GHASEMI & HAMID OMIDVAR
Other Supervisor:

2014 Jan

Investigation the effect of SiC nano particles on microstructure and mechanical properties of friction stir welding of dissimilar aluminium alloy

HAMED AZARMEHR

2013 Oct

Simulation of strain and strain rate in producing nanostructures of Mg-AZ31 Alloy by Friction Stir Processing

MOHAMMAD NAVAZANI

2013 Oct

Assessment of effective parameters in brazing process on dissimilar joining Ti-6Al-4V to stainless steel 316L alloys by infrared furnace

AMIN SAMADI MOGHADDAM & SEYED MOHAMMAD H. MIRBAGHERI
Other Supervisor:

2013 Oct

Strain and strain-rate simulation of FSW process done on AA5052-SiC nanocomposite

MOHSEN BODAGHI

2013 Oct

Simulation of strain in nanostructure production by means of equal channel angular pressing

FATEMEH GHARE KHANI

2013 Oct

Study Mechanical Properties of Joints of Stainless Steel and Low Carbon Steel Produced by SMAW and TIG techniques

FARZAD GHENAAT POU

2013 Oct

Investigation the effect of sic nano particles on microstructure and mechanical peroperties of friction stir butt welding of al 6061

MOHAMMAD NAMDAR

2013 Oct

The effect of H2S containing environments on the fracture of welded A516 steel

MEHRDAD YOUSEFI

2013 May

Producing nanostructure/ ultra fine grain from aluminium alloy 6061 via Equal Channel Angular Pressing (ECAP) and study its mechanical properties

SOROUSH BAKHSHI

2012 Oct

friction stir welding of Al 7075 by adding sic nano particles

MOHSEN BAHRAMI

2012 Oct

Molecular Dynamic simulation of hardness and scratch on nano structured surface layers

MAHDI MARAGHEI

2012 Jun

FSW of Monel 400 to Stainless Steel 316 and study its metallurgical and mechanical properties

ABOOZAR AGHAEI

2011 Oct

Producing nano composites surface layer by FSP & study its mechanical properties

ARASH HEYDARIAN

2011 Oct

simulation of

FAHIMEH ALI ABADI FARAHANI

2011 Feb

ALI CHABOK

2010 Nov

Formation

MONA MAZINANI

2010 Oct

study the fatigue behavior of nano structured Aluminum 7075 comparing to its conventional structure

FERESHTEH ILLBEIGI

2010 Jan

Microstructure and properties of nanostructured Cu-Al-Ni shape memory alloy

MOHAMMAD IZADINIA

2010 Jan

producing the nanostructured Copper in cold and hot conditions and comparing properties

MARYAM MOHAMAD BAGHERI

2009 Dec

Thermomechanical Processing of Alloy Ni60Ti40 to Determine the Optimum Condition for Hot Rolling of this Alloy

ALI AKBAR KHAMEI

2009 Sep

Baking behavior of nano-structured 6056 aluminum alloys

SAEEDEH YOONESIAN

2009 Feb

production of nano- structured IF steels via thermo mechanical treatment using warm brushing

MOHAMMAD NASIRIZADEH
Other Supervisor: SEYED MOHAMMAD H. MIRBAGHERI

2009 Jan

PRODUCTION OF NANOSTRUCTURE IN IF STEEL AND STUDY ITS CORROSION BEHAVIOR

HAMED ESKANDARI

2008 Mar

PRODUCTION OF NANOSTRURE IN IF STEELS BY BRUSHING AND STUDY ITS MECHANICAL PROPERTIES

KAMAL LATIFI

2008 Mar

SIMULATION OF FATIGUE BEHAVIOR OF RAILWAYS RAIL

REZA MALAKOOTIKHAH

2007 Apr

DYNAMIC NANO PRECIPITATION IN IF-STEEL

MILAD MOHAMADZADEH

2007 Feb

Synthesis and Molecular Dynamic Simulation in High Entropy Oxide in the Anode

SALEHEH AL-SADAT NABAVI HAMEDANI

2026 Jun

Synthesis of High Entropy Oxide Electrocatalyst For application in Lithium-air batteries

MELIKA AKBARI

2026 Feb

The Effect of Thermomechanical Processes on MicrostructureMechanical Properties and Wear Behavior of non-equiatomic CrCuFeMnNi High Entropy Alloy

ALI VARPOSHTI

2026 Feb

Books

Title

Author(s)

Publisher country

publication date

version

Severe plastic deformation technology

M. Abbasi, K. Dehghani, Mohammad Givi

Iran

Journal Papers

M. Hemmati Saznaghi, K. Dehghani, , A. Sadeghi Ghazvini, "Synthesis methods effects on performance and aging of cobalt-free (CrMnFeNiAl)3O4 high-entropy oxide nanoparticles as lithium-ion battery anodes", Scientific Reports, 2026 Sep vol. 2, no. 1, pp.1-16, 2026.

W. Shaeqer, K. Dehghani, S. Hamed, "Effect of Al and Ni content on phase formation and mechanical properties of AlCoCrFeNi high-entropy alloys", Materials Chemistry and Physics, 2026 May vol. 362, no. , pp.132633-132633, 2026.

R. Hajizadeh, M. Rahimi, K. Dehghani, "The effect of NiCrN coating by Arc-PVD method on the corrosion behavior and hydrophobicity of the low-density AlCrFeMnTi high entropy alloy", Journal of Materials Research and Technology-Jmr and T, 2026 Feb vol. 41, no. , pp.3968-3979, 2026.

W. Shaeqer, K. Dehghani, M.J. Jweeg, A. Nourani, H. Shahmir, "Microstructural Evolutions and Mechanical Properties of Novel AlTiCrFe(Mn/Nb) Lightweight High-Entropy Alloys", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2025 Nov vol. 56, no. , pp.4771-4784, 2025.

K. Dehghani, M. Rajabi Tootkaboni, H. Shahmir, "Mechanical properties and corrosion behavior of TiNbZrMoV high-entropy-alloy", Journal of Materials Science-Materials In Engineering, 2025 Sep vol. 20, no. , pp.1-13, 2025.

M. Seyfpoor Byjnavandi, K. Dehghani, "Investigating the effect of hot -rolling and cold -rolling on the microstructure and mechanical properties of high entropy alloy AlCoCrFeNi2.1", Journal of Materials Research and Technology-Jmr and T, 2025 Apr vol. 36, no. 1, pp.10120-10130, 2025.

R. Hajizadeh, W. Shaeqer, K. Dehghani, "Investigating the effect of stearic acid on the hydrophobicity and corrosion esistance of the anodized AlCrFeMnTi high entropy alloy", Journal of Materials Research and Technology-Jmr and T, 2025 Apr vol. 36, no. 36, pp.4738-4749, 2025.

S. Moemeni, K. Dehghani, "Exploring the coupled effect of cold rolling level and annealing parameters on the development of microstructure, mechanical properties and texture of Al0.3CoCrFeNi high entropy alloy", Materials Today Communications, 2025 Mar vol. 46, no. 1, pp.1-10, 2025.

S.A. Nabavi Hamedani, , K. Dehghani, "Photothermal high-entropy materials: A review", Sustainable Materials and Technologies, 2025 Feb vol. 43, no. 1, pp.1-39, 2025.

S.R. Siasi Rad, K. Dehghani, "The role of MgO nanoparticles on the corrosion resistance of hot-dip Al-Zn coating", Heliyon, 2024 Dec vol. 11, no. 1, , 2024.

M. Vaghari, K. Dehghani, "The effect of carbon on the microstructures and mechanical properties of non-equiatomic Cr 15 Cu 5 Fe 20 Mn 25 Ni 35 high-entropy alloy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2024 Nov vol. 919, no. 147525, pp.1-10, 2024.

M. Rajabi Tootkaboni, K. Dehghani, "Development of a novel Ti35Nb25Zr15Mo15V10 high-entropy alloy for metallic biomaterials", Physica B-Condensed Matter, 2024 Oct vol. 691, no. 416283, pp.1-11, 2024.

K. Karami, , K. Dehghani, M. Hemmati Saznaghi, Reza Riahifar, "Using Spinel (CrNiFeMnZn)3O4 Nanoparticles HEOs As Free Cobalt Anode in Ion-Lithium Batteries", Journal of Energy Storage, 2024 Sep vol. 101, no. 113823, pp.1-9, 2024.

E. Rajabitoutkaboni, K. Dehghani, "Tribological Behavior In-Vitro Biocompatibility of a Newly Designed TiZrNbMoTa High-Entropy Alloy", Advanced Engineering Materials, 2024 Aug vol. 26, no. 17, pp.1-13, 2024.

K. Dehghani, S. Moemeni, "An investigation to microstructural and texture evolution during the cold rolling of Al0.3CoCrFeNi high entropy alloy", Materials Today Communications, 2024 Jun vol. 40, no. 40, pp.1-10, 2024.

S.A. Erfani Mobarakeh, K. Dehghani, "Microstructural evolutions and corrosion behavior of nanocomposite AlCoCrFeNi2.1 high-entropy alloy produced via friction stir processing", Journal of Materials Research and Technology-Jmr and T, 2024 May vol. 30, no. 1, pp.8345-8358, 2024.

A. Hosseinifar, K. Dehghani, "Microstructure and Texture Evolution of Al0.3CoCrFeNi High-Entropy Alloy After Cold Rolling Deformation", Transactions of The Indian Institute of Metals, 2024 Feb vol. 77, no. 6, pp.1467-1479, 2024.

A. Ghaderi, K. Dehghani, "Mechanical Behavior of Al0.5CoCrFeNi HEA During Warm Deformation", Jom, 2024 Feb vol. 76, no. 76, pp.1962-1972, 2024.

D. Mirahmadi Khaki, K. Dehghani, A. Shamsipoor, A. Kalaki, "Mechanism of self-healing behavior in rolled Cu-2Be flat product", Engineering Failure Analysis, 2023 Dec vol. 156, no. 156, pp.1-13, 2023.

H. Moghanni Alghalandis, K. Dehghani, Ali Shafiei, "Effects of process parameters on microstructure and mechanical properties of Al0.5CoCrFeNi high entropy alloy thin sheets using pinless friction stir welding", Journal of Materials Research and Technology-Jmr and T, 2023 Dec vol. 16, no. 1, pp.1069-1089, 2023.

M. Vaghari, K. Dehghani, "Computational and experimental investigation of a new non equiatomic FCC single-phase Cr15Cu5Fe20Mn25Ni35 high-entropy alloy", Physica B-Condensed Matter, 2023 Oct vol. -, no. 671, pp.1-9, 2023.

A. Hosseinifar, K. Dehghani, "The simulation of texture of Al0.3CoCrFeNi high entropy alloy after cold deformation using visco-plastic self-consistent model", Iranian Journal of Materials Forming, 2023 May vol. 10, no. 1, pp.53-60, 2023.

M. Seyfpoor Byjnavandi, A. Ghaderi, K. Dehghani, "Effect of Cold Rolling on the Microstructure Evolution, Mechanical, and Corrosion Properties of AlCoCrFeNi2.4 High-Entropy Alloy", Journal of Materials Engineering and Performance, 2023 Mar vol. 71, no. 1, pp.1-15, 2023.

D. Mirahmadi Khaki, K. Dehghani, A. Shamsipoor, Ali Kalaki, "Hot deformation behavior, microstructure evolution and processing map of Cu-2Be alloy", Journal of Materials Research and Technology-Jmr and T, 2023 Mar vol. 24, no. 0, pp.376-394, 2023.

S.A. Erfani Mobarakeh, K. Dehghani, "Nanocomposite AlCoCrFeNi2.1 high-entropy alloy produced by FSP", Journal of Materials Research and Technology-Jmr and T, 2022 May vol. 19, no. 5, pp.765-778, 2022.

S.A. Erfani Mobarakeh, K. Dehghani, "Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy", Iranian Journal of Materials Forming, 2022 Feb vol. 9, no. 1, pp.41-46, 2022.

S.A. Erfani Mobarakeh, T. Seyedhosseini, K. Dehghani, "Tribological and mechanical properties of surface nanocomposite AlCoCrFeNi2.1 high-entropy alloy produced by FSP", Journal of Alloys and Compounds, 2021 Dec vol. 896, no. 17, pp.163052-163063, 2021.

A. Ghaderi, H. Moghanni Alghalandis, K. Dehghani, "Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments", Journal of Materials Engineering and Performance, 2021 Jul vol. 30, no. 10, pp.7817-7825, 2021.

A. Abbasi, K. Dehghani, V. Sajadifar, T. Niendorf, "Quenching of High Entropy Alloys after Annealing", Iranian Journal of Materials Science and Engineering, 2020 Nov vol. 4, no. 17, pp.130-141, 2020.

B. Rahmatian, K. Dehghani, S.E. Mirsalehi, "Effect of adding SiC nanoparticles to nugget zone of thick AA5083 aluminium alloy joined by using double-sided friction stir welding", Journal of Manufacturing Processes, 2020 Apr vol. 52, no. 0, pp.152-164, 2020.

K. Dehghani, S. Akbarian, "On the molecular dynamics simulation of fatigue behavior of pre-cracked aluminum chip for NEMS application: Effect of cyclic loading mode and surface roughness geometry", International Journal of Fatigue, 2020 Mar vol. 135, no. 105570, pp.1-11, 2020.

H. Eskandari, Mohsen Saboktakin, A. Ghanbari, Babak Nasiri, K. Dehghani, "A study on the surface severe plastic deformation and corrosion behavior of an interstitial free steel", Materials Research Express, 2020 Jan vol. 6, no. 12, pp.1-11, 2020.

K. Dehghani, "Hot tensile properties of CoCrFeMnNi(NbC) compositionally complex alloys", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019 Dec vol. 772, no. 1, pp.138771-138771, 2019.

K. Dehghani, "Microstructure and mechanical properties of Co19Cr20Fe20Mn21Ni19 and Co19Cr20Fe20Mn21Ni19Nb0.06C0.8 high-entropy/compositionally-complex alloys after annealing", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019 Nov vol. 772, no. 772, pp.138812-138812, 2019.

K. Dehghani, "Cryogenic Treatment of CoCrFeMnNi(NbC) High-Entropy Alloys", Journal of Materials Engineering and Performance, 2019 Nov vol. 0, no. 0, pp.1-10, 2019.

M. Mirzadeh, K. Dehghani, M. Rezaei, Z. Mahidashti, "Effect of stearic acid as a low cost and green material on the self-cleaning and anti-corrosion behavior of anodized titanium", Colloids and Surfaces A-Physicochemical and Engineering Aspects, 2019 Sep vol. 583, no. 123971, pp.1-10, 2019.

B. Rahmatian, S.E. Mirsalehi, K. Dehghani, "Metallurgical and Mechanical Characterization of Double-Sided Friction Stir Welded Thick AA5083 Aluminum Alloy Joints", Transactions of The Indian Institute of Metals, 2019 Jul vol. 0, no. 0, , 2019.

S.S. Firouzabadi, K. Dehghani, M. Naderi, F. Mahboubi, "fracture toughness and plasticity evaluation of sputter deposited tantalum nitride film", , 2019 May vol. 13, no. 1, pp.103-112, 2019.

N. Sharifi Asl, S.E. Mirsalehi, K. Dehghani, "Effect of TiO2 nanoparticles addition on microstructure and mechanical properties of dissimilar friction stir welded AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy", Journal of Manufacturing Processes, 2019 Apr vol. 38, no. 0, pp.338-354, 2019.

K. Dehghani, "Effect of Nb-C addition on the microstructure and mechanical properties of CoCrFeMnNi high entropy alloys during homogenisation", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019 Mar vol. 753, no. 0, pp.224-231, 2019.

E. Shafie, K. Dehghani, F. Ostovan, M. Toozandehjani, "Effect of Microstructure and Texture Evolution During Variable Gauge Rolling on Mechanical Properties of Tailor Rolled Blanks", Metals and Materials International, 2019 Jan vol. 1, no. 1, pp.1-12, 2019.

K. Dehghani, "Phase prediction and microstructure of centrifugally cast non-equiatomic Co-Cr-Fe-Mn-Ni(Nb,C) high entropy alloys", Journal of Alloys and Compounds, 2019 Jan vol. 783, no. 0, pp.292-299, 2019.

R. Pouriamanesh, K. Dehghani, "study the microstructure and hardness of FSWed steel in the presence of TiO2", , 2018 Dec vol. 12, no. 3, pp.121-135, 2018.

R. Pouriamanesh, K. Dehghani, Rudolf Vallant, Norbert Enzonger, "Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels", Journal of Materials Engineering and Performance, 2018 Oct vol. 0, no. 0, pp.1-11, 2018.

Akbar Jafari, K. Dehghani, K. Bahaaddini, R. Abbasi Hataie, "Experimental comparison of abrasive and erosive wear characteristics of four wear-resistant steels", Wear, 2018 Oct vol. 416–417, no. 1, pp.14-26, 2018.

R. Pouriamanesh, K. Dehghani, Rudolf Vallant, "Friction stir welding of API X70 steel incorporating Ti-dioxide", Canadian Metallurgical Quarterly, 2018 Jul vol. -, no. 0, pp.1-13, 2018.

E. Shafiei Liravinejad, K. Dehghani, "Effects of Deformation Conditions on the Rolling Force during Variable Gauge Rolling", Journal of Manufacturing and Materials Processing, 2018 Jul vol. 48, no. 1, pp.2-12, 2018.

Ali Shafiei, K. Dehghani, "Production of superhydrophilic glass and glaze surfaces by pure water treatment", Glass Technology-European Journal of Glass Science and Technology Part A, 2018 Jun vol. 60, no. 3, pp.65-72, 2018.

S.H. Seyed Ebrahimi, K. Dehghani, J. Aghazadeh Mohandesi, Mohammad Bagher Ghasemian, Shahab Zangeneh, "Investigation on microstructure and mechanical properties of Al/Al-Zn-Mg-Cu laminated composite fabricated by accumulative roll bonding (ARB) process", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2018 Mar vol. 718, no. 0, pp.311-320, 2018.

E. Shafiei Liravinejad, K. Dehghani, "Effects of thickness ratio and length of thickness transition zone on the tensile behavior of tailor rolled blanks", Transactions of The Indian Institute of Metals, 2017 Dec vol. 75, no. 2, pp.30-35, 2017.

M. Jokari Sheshdeh, F. Mahboubi, K. Dehghani, "Structure and tribological behavior of diamond-like carbon coatings deposited on the martensitic stainless steel: The influence of gas composition and temperature", Diamond and Related Materials, 2017 Dec vol. 81, no. 1, pp.77-88, 2017.

E. Shafiei Liravinejad, K. Dehghani, "Effects of thickness ratio on the total elongation of tailor rolled blanks", Canadian Metallurgical Quarterly, 2017 Oct vol. 57, no. 0, pp.1-8, 2017.

S.S. Firouzabadi, M. Naderi, K. Dehghani, F. Mahboubi, "Effect of nitrogen flow ratio on nano-mechanical properties of tantalum nitride thin film", Journal of Alloys and Compounds, 2017 Sep vol. 719, no. 0, pp.63-70, 2017.

H. Alihosseini, K. Dehghani, Jamshid Kamali, "Microstructure characterization, mechanical properties, compressibility and sintering behavior of Al-B4C nanocomposite powders", Advanced Powder Technology, 2017 Aug vol. 28, no. 9, pp.2126-2134, 2017.

E. Shafiei Liravinejad, K. Dehghani, "Tensile behavior of tailor rolled blanks with longitudinal thickness transition zone: Introducing a new tensile specimen", Vacuum, 2017 Jun vol. 143, no. 0, pp.71-86, 2017.

H. Alihosseini, K. Dehghani, "Analysis of Particle Distribution in Milled Al-Based Composites Reinforced by B4C Nanoparticles", Journal of Materials Engineering and Performance, 2017 May vol. 26, no. 4, pp.1856-1864, 2017.

M. Bodaghi, K. Dehghani, "Friction stir welding of AA5052: the effects of SiC nano-particles addition", International Journal of Advanced Manufacturing Technology, 2017 Jan vol. 88, no. 9, pp.2651-2660, 2017.

E. Shafiei Liravinejad, N. Goodarzi, K. Dehghani, A. Soltani Tehrani, "A new constitutive equation to predict single peak flow stress curves at high temperatures: a comprehensive study on different steels", Canadian Metallurgical Quarterly, 2017 Jan vol. 56, no. 1, pp.104-112, 2017.

H. Alihosseini, K. Dehghani, J Kamali, "Manufacturing seamless square tubes of B4C-reinforced aluminum composites by extrusion", International Journal of Advanced Manufacturing Technology, 2016 Oct vol. 0, no. 0, pp.1-10, 2016.

E. Shafiei Liravinejad, K. Dehghani, "Prediction of Single-Peak Flow Stress Curves at High Temperatures Using a New Logarithmic-Power Function", Journal of Materials Engineering and Performance, 2016 Jul vol. 25, no. 9, pp.4024-4035, 2016.

S.S. Firouzabadi, K. Dehghani, M. Naderi, F. Mahboubi, "Numerical investigation of sputtering power effect on nano-tribological properties of tantalum-nitride film using molecular dynamics simulation", Applied Surface Science, 2016 Jan vol. 1, no. 367, pp.197-204, 2016.

A. Chabok, K. Dehghani, A. Jazani, "Comparing the Fatigue and Corrosion Behavior of Nanograin and Coarse-Grain IF Steels", Acta Mathematica Sinica-English Series, 2016 Jan vol. 28, no. 3, pp.295-301, 2016.

S.F. Tebyani, K. Dehghani, "Effects of SiC nanopowders on the mechanical properties and microstructure of interstitial free steel joined via friction stir spot welding", Materials and Design, 2015 Nov vol. 90, no. 0, pp.660-668, 2015.

H. Alihosseini, M.aslezaeem, K. Dehghani, Gh. Faraji, "Producing High strength aluminum alloy by combination of equal channel angular pressing and bake hardening", Materials Letters, 2015 Nov vol. 140, no. 0, pp.196-199, 2015.

K. Dehghani, Reza Ghorbani, A. R. Soltanipoor, "Microstructural evolutions and mechanical properties of friction stir welding of 7075-O aluminium alloy", International Journal of Advanced Manufacturing Technology, 2015 Nov vol. 77, no. 77, pp.1671-1679, 2015.

M. Navazani, K. Dehghani, "Investigation of Microstructure and Hardness of Mg/TiC Surface Composite Fabricated by Friction Stir Processing (FSP", Procedia Materials Science, 2015 Nov vol. 11, no. 0, pp.509-514, 2015.

M. Navazani, K. Dehghani, "An analytical investigation on the effects of heat input on microstructures, phase transformations and mechanical properties of ultrafine grained Mg alloys fabricated by friction stir processing in different velocity ratios", Procedia Materials Science, 2015 Nov vol. 11, no. 0, pp.101-107, 2015.

H. Alihosseini, K. Dehghani, Ghader Faraji, "Simulation of Fatigue Life Behavior of Circular Cross-Section Bar with Straight-Fronted Crack", Modeling and Numerical Simulation of Material Science, 2015 Oct vol. 4, no. 3, pp.128-135, 2015.

M. Navazani, K. Dehghani, "Fabrication of Mg-ZrO2surface layer composites by friction stir processing", Journal of Materials Processing Technology, 2015 Sep vol. 229, no. 0, pp.439-449, 2015.

S. Ranjbarbahadori, K. Dehghani, Seyed Ali Asghar Akbari Mousavi, "Comparison of microstructure and mechanical properties of pure copper processed by twist extrusion and equal channel angular pressing", Materials Letters, 2015 Aug vol. 152, no. 0, pp.48-52, 2015.

Tagh Ghorbanzadeh, A. Soltanipoor, K. Dehghani, A. Chabok, "Microstructural evolutions and mechanical properties of friction stir welded AA2024-3", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2015 Jul vol. 230, no. 0, pp.75-87, 2015.

M. Ghafarpour, M. Kazemi, M. J. Mohammadi Sefat, A. Aziz, K. Dehghani, "EVALUATION OF DISSIMILAR JOINTS PROPERTIES OF 5083-H12 AND 6061-T6 ALUMINUM ALLOYS PRODUCED BY TUNGSTEN INERT GAS AND FRICTION STIR WELDING", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2015 Jul vol. 0, no. 0, pp.1-13, 2015.

S. Ranjbarbahadori, K. Dehghani, "Influence of intermediate annealing on the nanostructure and mechanical properties of pure copper processed by equal channel angular pressing and cold rolling", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2015 Jul vol. 46, no. 7, pp.2796-2802, 2015.

A. Khamei, K. Dehghani, Reza Mahmudi, "Modeling the Hot Ductility of AA6061 Aluminum Alloy After Severe Plastic Deformation", Jom, 2015 May vol. 67, no. 5, pp.966-972, 2015.

S.H. Seyed Ebrahimi, J. Aghazadeh Mohandesi, K. Dehghani, M. Emamy, Sh. Zangeneh, "The effect of Al-5Ti-1B on the microstructure, hardness and tensile properties of a new Zn rich aluminium alloy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015 Apr vol. 636, no. 0, pp.421-429, 2015.

A. Khamei, K. Dehghani, Soroush Bakhshi, Kamran Kalaye, "Hot and Cold Tensile Behavior of Al 6061 Produced By Equal Channel Angular Pressing and Subsequent Cold Rolling", Iranian Journal of Materials Forming, 2015 Mar vol. 2, no. 1, pp.30-42, 2015.

M. Afrasiabi, Gh. Faraji, V. Tavakoli, M.m. Mashadi, K. Dehghani, "The Effects of the Multi-pass Parallel Tubular Channel Angular Pressing on the Microstructure and Mechanical Properties of the Cu-Zn Tubes", Transactions of The Indian Institute of Metals, 2015 Mar vol. 68, no. 5, pp.873-878, 2015.

A. Khamei, K. Dehghani, "Effects of strain rate and temperature on hot tensile deformation of severe plastic deformed 6061 aluminum alloy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2015 Mar vol. 627, no. 1, pp.1-9, 2015.

S.F. Tebyani, K. Dehghani, "Friction stir spot welding of interstitial free steel with incorporating silicon carbide nanopowders", International Journal of Advanced Manufacturing Technology, 2015 Feb vol. 79, no. 0, pp.343-350, 2015.

A. Khamei, K. Dehghani, "Hot Ductility of Severe Plastic Deformed AA6061 Aluminum Alloy", Acta Metallurgica Sinica-English Letters, 2015 Jan vol. 28, no. 3, pp.322-330, 2015.

R. Nemati Chari, K. Dehghani, A. Kami, Dorel Banabic, "Application of response surface methodology for study of effective strain in equal channel angular pressing of AA6061 alloy", Romanian Journal of Technical Sciences-Applied Mechanics, 2014 Dec vol. 59, no. 3, pp.36-49, 2014.

A. Aghaei, K. Dehghani, "Characterizations of friction stir welding of dissimilar Monel400 and stainless steel 316", International Journal of Advanced Manufacturing Technology, 2014 Nov vol. 77, no. 0, pp.573-579, 2014.

A. Heydarian, K. Dehghani, T. Eslamkish, "Optimizing powder distribution in production of surface nano-composite via friction stir processing", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2014 Mar vol. 0, no. 0, pp.1-6, 2014.

M. Bahrami, Mohammad Kazem Besharati Givi, K. Dehghani, N. Parvin, "On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique", Materials and Design, 2014 Feb vol. 53, no. 0, pp.519-527, 2014.

M. Bahrami, N. Helme, K. Dehghani, Mohammad Kazem Besharati Givi, "Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013 Nov vol. 595, no. 595, pp.173-178, 2013.

Mohammad Javad Nayyeri, K. Dehghani, "Microstructure Evolution in As-Cast and SIMA-Processed AE42 Magnesium Alloy", Journal of Materials Engineering and Performance, 2013 Nov vol. 23, no. 9, pp.3077-3084, 2013.

K. Dehghani, M. Hosseini, A. Nekahi, "Comparing the corrosion behavior of nanograined and coarse-grained interstitial free steels", International Journal of Materials Research, 2013 Oct vol. 104, no. 10, pp.999-1006, 2013.

S. Ranjbarbahadori, K. Dehghani, F. Bakhshandeh, "Microstructural homogenization of ECAPed copper through post-rolling", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013 Sep vol. 588, no. 588, pp.260-264, 2013.

M. Bahrami, K. Dehghani, Mohammad Kazem Besharati Givi, "A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique", Materials and Design, 2013 Jul vol. 53, no. 53, pp.217-225, 2013.

S. Ranjbarbahadori, K. Dehghani, F. Bakhshandeh, "Microstructure, texture and mechanical properties of pure copper processed by ECAP and subsequent cold rolling", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013 Jul vol. 583, no. 583, pp.36-42, 2013.

Amir Etaati, K. Dehghani, "A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy", Materials Chemistry and Physics, 2013 Jun vol. 140, no. 1, pp.208-215, 2013.

Amir Momeni, K. Dehghani, Gholam Reza Ebrahimi, Shahab Kazemi, "Developing the Processing Maps Using the Hyperbolic Sine Constitutive Equation", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013 Jun vol. 44, no. 12, pp.5567-5576, 2013.

Amir Momeni, K. Dehghani, M. C. Poletti, "Law of mixture used to model the flow behavior of a duplex stainless steel at high temperatures", Materials Chemistry and Physics, 2013 May vol. 139, no. 2, pp.747-755, 2013.

M. Ghafarpour, Sina Kolahgar, B. Mollaei Dariani, K. Dehghani, "Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013 Apr vol. 0, no. 0, , 2013.

M. Musazadehmeybody, K. Dehghani, "The effect of crystallographic orientation on sintering behavior of Ni nanoparticles: a molecular dynamic study", Journal of Computational and Theoretical Nanoscience, 2013 Jan vol. 10, no. 6, pp.1-6, 2013.

Amir Etaati, K. Dehghani, Gholamreza Ebrahimi, Hao Wang, "Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations", Metals and Materials International, 2013 Jan vol. 19, no. 1, pp.5-9, 2013.

A. Chabok, K. Dehghani, "Effect of Processing Parameters on the Mechanical Properties of Interstitial Free Steel Subjected to Friction Stir Processing", Journal of Materials Engineering and Performance, 2012 Nov vol. 22, no. 5, pp.1324-1330, 2012.

Amir Momeni, K. Dehghani, M. Heydari, Mehdi Vaseghi, "Modeling the flow curve of AISI 410 martensitic stainless steel", Journal of Materials Engineering and Performance, 2012 Nov vol. 21, no. 11, pp.2238-2243, 2012.

K. Dehghani, A. Nekahi, "Interactive effects of aging parameters of AA6056", Metals and Materials International, 2012 Oct vol. 18, no. 5, pp.757-767, 2012.

100

Movaffaq Kateb, K. Dehghani, "Comparison of fracture behavior of sharp with blunt crack tip in nanocrystalline materials by molecular dynamics simulation", Journal of Modern Physics, 2012 May vol. 5, no. 1, pp.410-417, 2012.

101

K. Dehghani, "Comparing the bake hardening of nano-grain AA6056 with its coarse-grain structure", International Journal of Modern Physics:conference Series(Ijmpcs), 2012 May vol. 5, no. 1, pp.335-341, 2012.

102

H. Alihosseini, Mohsen Asle Zaeem, K. Dehghani, Hossein Asghar Shivaee, "Producing ultrafine-grained aluminum rods by cyclic forward-backward extrusion: Study the microstructures and mechanical properties", Materials Letters, 2012 May vol. 74, no. 1, pp.147-150, 2012.

103

H. Alihosseini, K. Dehghani, "Bake hardening of ultra-fine grained low carbon steel produced by constrained groove pressing", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012 Apr vol. 549, no. 1, pp.157-162, 2012.

104

M. Izadinia, K. Dehghani, "Microstructural evolution and mechanical properties of nanostructured Cu-Al-Ni shape memory alloys", International Journal of Minerals Metallurgy and Materials, 2012 Apr vol. 19, no. 4, pp.333-338, 2012.

105

H. Alihosseini, Ghader Faraji, Ahmad Faez Dizaji, K. Dehghani, "Characterization of ultra-fine grained aluminum produced by accumulative back extrusion (ABE)", Materials Characterization, 2012 Mar vol. 68, no. 1, pp.14-21, 2012.

106

A. Momeni, K. Dehghani, Xiang Xzung Zhang, "Mechanical and microstructural analysis of 2205 duplex stainless steel under working condition", Journal of Materials Science, 2012 Mar vol. 47, no. 6, pp.2966-2974, 2012.

107

Behzad Tolaminejad, K. Dehghani, "Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion", Materials and Design, 2012 Feb vol. 34, no. 1, pp.285-292, 2012.

108

Amir Momeni, K. Dehghani, "Microstructural Evolution and Flow Analysis during Hot Working of a Fe-Ni-Cr Superaustenitic Stainless Steel", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2011 Dec vol. 42, no. 7, pp.1925-1932, 2011.

109

K. Dehghani, "Bake hardening of nanograin AA7075 aluminum alloy", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Dec vol. 530, no. 1, pp.618-623, 2011.

110

Amir Etaati, K. Dehghani, "Microstructural Evolution of NiTi47.7Cu6.3 Alloy during Hot Deformation", Journal of Materials Science and Technology, 2011 Nov vol. 27, no. 10, pp.951-960, 2011.

111

H. Alihosseini, Mohsen Asle Zaeem, K. Dehghani, "A cyclic forward-backward extrusion process as a novel severe plastic deformation for production of ultrafine grains materials", Materials Letters, 2011 Oct vol. 68, no. 1, pp.204-208, 2011.

112

Mohammad Hossein Musazadeh, K. Dehghani, "Molecular dynamic simulation of crack propagation in nanocrystalline Ni containing different shapes and types of second phases", Computational Materials Science, 2011 Oct vol. 50, no. 11, pp.3075-3079, 2011.

113

Amir Momeni, K. Dehghani, Gholam Reza Ebrahimi, "Modeling the initiation of dynamic recrystallization using a dynamic recovery model", Journal of Alloys and Compounds, 2011 Sep vol. 509, no. 39, pp.9387-9393, 2011.

114

Hamid Alihossieni, Gholam Faraji, K. Dehghani, "Producing Ultrafine Grain Al6061 Alloy by Accumulative Back Extrusion Process", Journal of Materials Engineering and Performance, 2011 Aug vol. 0, no. 0, , 2011.

115

A. Momeni, K. Dehghani, "Microstructural Evolution and Flow Analysis during Hot Working of a Fe-Ni-Cr Superaustenitic Stainless Steel", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2011 Jul vol. 42, no. 7, pp.1925-1932, 2011.

116

K. Dehghani, Mehdi Mazinani, "Forming Nanocrystalline Surface Layers in Copper Using Friction Stir Processing", Materials and Manufacturing Processes, 2011 Jun vol. 26, no. 7, pp.922-925, 2011.

117

K. Dehghani, Ali Chabok, "Dependence of Zener parameter on the nanograins formed during friction stir processing of interstitial free steels", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 May vol. 528, no. 13, pp.4325-4330, 2011.

118

Mahsa Mehranfar, K. Dehghani, "Producing nanostructured super-austenitic steels by friction stir processing", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Apr vol. 528, no. 9, pp.3404-3408, 2011.

119

Amir Momeni, K. Dehghani, "Hot working behavior of 2205 austenite-ferrite duplex stainless steel characterized by constitutive equations and processing maps", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Jan vol. 528, no. 3, pp.1448-1454, 2011.

120

A. Momeni, K. Dehghani, "Hot working behavior of 2205 austenite-ferrite duplex stainless steel characterized by constitutive equations and processing maps", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2011 Jan vol. 528, no. 3, , 2011.

121

Mohammad Izadinia, K. Dehghani, "Structure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy produced by melt spinning", Transactions of Nonferrous Metals Society of China, 2011 Jan vol. 21, no. 9, pp.2037-2043, 2011.

122

123

K. Dehghani, A. Nekahi, "Using Response Surface Methodology to Model the Age Hardening of AA6061", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2010 Dec vol. 41, no. 12, , 2010.

124

A. Chabok, K. Dehghani, "Formation of nanograin in IF steels by friction stir processing", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010 Nov vol. 528, no. 1, , 2010.

125

A. Momeni, K. Dehghani, Golam Reza Ebrahimi, Hamid Keshmiri, "Modeling the Flow Curve Characteristics of 410 Martensitic Stainless Steel Under Hot Working Condition", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2010 Nov vol. 41, no. 11, , 2010.

126

Ali Shafiei, Parvin Abachi, K. Dehghani, Kazem Pourazarang, "On the Formation of Intermetallics during the Furnace Brazing of Pure Titanium to 304 Stainless Steel Using Ag (30-50%)-Cu Filler Metals", Materials and Manufacturing Processes, 2010 Nov vol. 25, no. 11, pp.1333-1340, 2010.

127

K. Dehghani, A. Nekahi, M. Mohmmad Mirzaei, "Using response surface methodology to optimize the strain aging response of AA5052", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010 Oct vol. 527, no. 27, , 2010.

128

A. Khamei, K. Dehghani, "Microstructural Evolution During the Hot Deformation of Ti-55Ni (at. pct) Intermetallic Alloy", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2010 Oct vol. 41, no. 10, , 2010.

129

A. Momeni, K. Dehghani, "Prediction of Dynamic Recrystallization Kinetics and Grain Size for 410 Martensitic Stainless Steel during Hot Deformation", Metals and Materials International, 2010 Oct vol. 16, no. 5, , 2010.

130

A. Nekahi, K. Dehghani, "Modeling the thermomechanical effects on baking behavior of low carbon steels using response surface methodology", Materials and Design, 2010 Sep vol. 31, no. 8, pp.3845-3851, 2010.

131

A. Momeni, K. Dehghani, "Effect of hot working on secondary phase formation in 2205 duplex stainless steel", Journal of Materials Science and Technology, 2010 Sep vol. 26, no. 9, , 2010.

132

A. Khamei, K. Dehghani, "A study on the mechanical behavior and microstructural evolution of Ni60 wt%-Ti40 wt% (60Nitinol intermetallic compound during hot deformation", Materials Chemistry and Physics, 2010 Sep vol. 123, no. 1, pp.269-277, 2010.

133

A. Momeni, K. Dehghani, "Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010 Aug vol. 527, no. 21, , 2010.

134

Hassan Alihosseini, K. Dehghani, "Modeling and Failure Analysis of a Broken Railway Axle: Effects of Surface Defects and Inclusions", Journal of Failure Analysis and Prevention, 2010 Jun vol. 10, no. 3, pp.233-239, 2010.

135

K. Dehghani, M. Nasirizadeh, S. Bagherzadeh, "Surface nanostructuring of interstitial free steel by wire brushing", Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2010 Jun vol. 224, no. 4, pp.190-198, 2010.

136

K. Dehghani, A. Nekahi, M. Mohmmad Mirzaei, "Optimizing the bake hardening behavior of Al7075 using response surface methodology", Materials and Design, 2010 Apr vol. 31, no. 4, pp.1768-1775, 2010.

137

K. Dehghani, A. Nekahi, "Artificial neural network to predict the effect of thermomechanical treatments on bake hardenability of low carbon steels", Materials and Design, 2010 Apr vol. 31, no. 4, pp.2224-2229, 2010.

138

A. Momeni, K. Dehghani, H. Keshmiri, "Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel", Materials Science and Engineering A, 2010 Mar vol. 527, no. 527, , 2010.

139

A.A. Khamei, K. Dehghani, "Modeling the hot-deformation behavior of Ni60 wt%-Ti40 wt% intermetallic alloy", Journal of Alloys and Compounds, 2010 Feb vol. 490, no. 490, , 2010.

140

K. Dehghani, Ali Akbar Jafari, "Finite element stress analysis of forging dies to improve their fatigue life", Materials Science-Poland, 2010 Jan vol. 28, no. 1, pp.139-152, 2010.

141

Hossein Abdollahi Ali Beik, K. Dehghani, "Plotting the friction hills during the real industrial cold rolling of sheet", , 2010 Jan vol. 20, no. 71, pp.81-88, 2010.

142

K. Dehghani, "Hot deformation behavior of 60Nitinol (Ni60 wt%-Ti40 wt%) alloy: Experimental and computational studies", , 2010 Jan vol. , no. 527, , 2010.

143

H. Farnoush, A. Momeni, K. Dehghani, J. Aghazadeh Mohandesi, H. Keshmiri, "Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases", , 2010 Jan vol. , no. 31, , 2010.

144

H. Keshmiri, A. Momeni, K. Dehghani, G.R. Heidri, "effect of aging time and temperature on mechanical properties and microstructural Evolution of 2205 Ferritic -Austenitic Stainless Steel", Materials Science and Technology, 2009 Dec vol. , no. 5, , 2009.

145

K. Dehghani, "Modeling the microstructural evolution and effect of cooling rate on the nanograins formed during the friction stir processing of Al5083", , 2009 Dec vol. , no. 527, , 2009.

146

M. Salehi, Khorameh Farrokhzadeh, K. Dehghani, Amirhossein Kovkabi, Seyyed Hossein Yazdani Tabaie, Atieh Nekahi, "Study of Vanadium and Niobium on the fatigue behaviour of Termite Weld", Journal of Welding Engineering, 2009 Dec vol. 11, no. 34, pp.26-30, 2009.

147

H. Abdollahi, K. Dehghani, "Plotting the friction hills during the real industrial cold rolling of sheet", Amirkabir International Journal of Electrical and Electronics Engineering, 2009 May vol. 20, no. 70, , 2009.

148

K. Dehghani, "A New Model for Inverse Hall -Petch Relation of Nanocrystalline Materials", Journal of Materials Engineering and Performance, 2008 Oct vol. , no. 17, , 2008.

149

K. Dehghani, H. Naemi, "Effect of Thermomechanical Proccessing on Forming Limit Diagrams Predicted by Neural Networks", Materials and Manufacturing Processes, 2008 Oct vol. , no. 23, , 2008.

150

K. Dehghani, M. Salehi, M. Salehi, "Comparing the melt-spun nanostructured aluminum 6061 foils with conventional direct chill ingot", , 2008 Aug vol. , no. 489, , 2008.

151

M. Salehi, K. Dehghani, "Structure and properties of nanostructured aluminum A413.1 produced by melt spinning compared with ingot microstructure", Journal of Alloys and Compounds, 2008 Jun vol. , no. 457, , 2008.

152

K. Dehghani, "Predicting The Bake Hardenability of Steels Using Neural Network Modeling", Materials Letters, 2008 Jan vol. , no. 62, , 2008.

153

K. Dehghani, Amir Shafiei, "Predicting the bake hardenability of steels using neural network modeling", Materials Letters, 2008 Jan vol. 62, no. 2, pp.173-178, 2008.

154

H. Abdollahi, K. Dehghani, "Irregularity in Friction Hills During the Cold Rolling of Materials", International Journal of Material Forming, 2008 Jan vol. , no. 1, , 2008.

155

S.M. Mosavy Zadh Noghby, K. Dehghani, M. Pouran-vary, "Failure Analysis of Automatic Coupler SA-3 in Railway Carriages", Engineering Failure Analysis, 2007 Jul vol. , no. 14, , 2007.

156

A. Momeni, K. Dehghani, M Torkan, "bake hardening of a low carbon steel for automotive applications", , 2007 Jan vol. 0, no. 13, , 2007.

157

K. Dehghani, H. Abdollahi, "Analyzing The Cold Rolling of Aluminum Using a New Software (Matroll)", Materials Science Forum, 2006 Sep vol. , no. 0, , 2006.

158

K. Dehghani, J.j Jonas, "Dynamic bake hardening of IF steels", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2000 May vol. , no. , , 2000.

159

K. Dehghani, J.j Jonas, "Dynamic Bake Hardening of Interstitial -Free Steels", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2000 May vol. , no. 0, , 2000.

160

J. Aghazadeh Mohandesi, K. Dehghani, "Effeect of coefficient of friction on shrinkage during aluminiunt sheet rolling", , 1994 Jan vol. 0, no. 0, , 1994.

Conference Papers

A. Hosseinifar, K. Dehghani, "study of anisotropy in mechanical properties of Al0.3CoCrFeNi alloy sheet after cold deformation,", The 13th International Conference on Materials Engineering and Metallurgy, Dec 2024.

A. Hosseinifar, K. Dehghani, "Investigation of Texture of Al0.3CoCrFeNi high entropy alloy during cold rolling with experiments and crystal plasticity simulation,", 12th international conference on materials science and metallurgical engineering 2023, Nov 2023.

A. Ghaderi, K. Dehghani, "Microstructural evolutions and mechanical properties of Al0.5CoCrFeNi high-entropy alloy after cold rolling and annealing treatments,", 9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020), Nov 2020.

A. Ghaderi, H. Moghanni Alghalandis, Mehdi Soltanalinejad, , K. Dehghani, "Effect of Annealing on the Microstructure and Hardness of Al0.5CoCrFeNi High Entropy Alloy,", 8th International Conference on Materials Engineering and Metallurgy (iMat2019), Oct 2019.

M. Seyfpoor Byjnavandi, Hamed Shahmir, K. Dehghani, "Investigation of the effect of severe rolling process on the structure and hardness of high entropy alloy AlCoCrFeNi2.1,", 8th Iran International Conference on Materials and Metallurgical Engineering, Oct 2019.

Elham Zamani, Saeed Kohaei, K. Dehghani, "Fabrication and Mechanical Properties of Aluminum Composite Reinforced with Functionalized Carbon Nanotubes,", International biennial con. on ultra-fine grained and nanaostructured materials, Nov 2017.

N. Mastoori, K. Dehghani, Gh. Ashuri, "Investigation of FSW on microstructural characterization and mechanical properties of Nano-TiO2 doped API-X70 steel,", International biennial con. on ultra-fine grained and nanaostructured materials, Nov 2017.

N. Mastoori, K. Dehghani, Gh. Ashuri, "Assessment of Friction Stir Welding (FSW) on tribological performance of Nano-TiO2 doped API- X70 steel,", International biennial con. on ultra-fine grained and nanaostructured materials, Nov 2017.

M. Namdar, K. Dehghani, "The effect of SiC nano particles on mechanical properties of double sided friction stir welding of AA 6061,", International biennial con. on ultra-fine grained and nanaostructured materials, Nov 2017.

Z. Razaghi, K. Dehghani, "Reactive magnetron sputtering of tantalum nitride on the austenitic stainless steal substrate and investigation of the effect of nitrogen gas on the structure and properties of the coating,", the international conference on materials engineering and metallurgy, Oct 2017.

A. Farahmand Boroujeni, K. Dehghani, Habib Rastegari, "Micro-structure and Micro-hardness Evaluation Of Dissimilar weldmate HSLA 100 To A517,", intentional conference on Materials and Metallurgical Engineering, Oct 2017.

R. Pouriamanesh, K. Dehghani, A. Hutter, R. Vallant, N. Enzinger, Ch. Sommitsch, "Friction stir welding on micro-structure and properties of microTiO2 doped HSLA steel,", 41th CWS international conference welding 2016, Aug 2016.

S. Miraghaie, K. Dehghani, S.E. Mirsalehi, Z. Tajbakhshjou, "The effect of reinforcing titanium oxide nanoparticles on the properties of AZ31 sheet by friction stir processing,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

S. Miraghaie, K. Dehghani, S.E. Mirsalehi, "The influence of rotational and traverse speed on microstructure and hardness of Al 5086 / TiO2 nanocomposites fabricated by friction stir processing,", 4th International Engineering Materials & Metallurgy Conference, Nov 2015.

A. Farahmand Boroujeni, K. Dehghani, H Rastegari, A. Mohammad Ghasemi, V. Javaheri, "Evaluation of fracture toughness of welded HSLA100-A517,", imat2015, 4th international conference & 9th congress of Iranian metallurgical engineering society, Nov 2015.

S. Ali Akbarpour, K. Dehghani, "Mullite oxidation resistant coating for SiC-coated graphite by plasma spraying,", 1st International Conference On Advanced Ceramics, May 2015.

A. Farahmand Boroujeni, K. Dehghani, A.A. Mohammad Ghassemi, "study the toughness of HSLA100 -A517 welds,", welding and non-destructive society, Dec 2014.

K. Dalaei, K. Dehghani, "Simulation of Friction Stir Processing Of Aluminum Alloy 6061,", 3rd International Engineering Materials & Metallurgy Conference, Nov 2014.

S.F. Tebyani, K. Dehghani, Mohammad Hossein Hassanniya, "The effects of SiC on the tensile properties and microstructure of interstitial free steel joints welded by friction stir spot welding,", 5th international congress on nanoscience and nanotechnology, Oct 2014.

S.F. Tebyani, K. Dehghani, Sirous Khabbazabkenar, Mohammad Hossein Hassan Nia, "influence of SiC nanopowders on the mechanical properties and microstructure of IF steel welded via friction stir spot welding,", 2nd international surface treatment symposium, Jun 2014.

M. Yosefi, Reza Hoseinzadeh Taghani, K. Dehghani, "Investigation of the effect of stress on the breakage method of iron welded in H2S environment,", First International Conference on welding and non destructive testing, 14th national conference on welding and enspection, 3rd national conference on NDT, Feb 2014.

F. Sharifi, M. Maraghei, K. Dehghani, "Study of crack propagation in Al-Cu alloys with different percent of Cu particles: Molecular Dynamic,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

F. Bakhshandeh, K. Dehghani, S. Ranjbarbahadori, "The effect of post-rolling on the mechanical properties of ECAPed copper,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

F. Ghare Khani, K. Dehghani, "Experimental and finite element studies of the ultrafine grained 6061Al alloy processed by ECAE,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

F. Bakhshandeh, K. Dehghani, S. Ranjbarbahadori, "Processing of pure copper through ECAP and subsequent cold-rolling,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

M. Bodaghi, K. Dehghani, "Microstructural and Mechanical Characterization of friction stir welded AA5052 with added SiC nano particles,", 4th international conference on ultrafine grained and nanostructured materals, Nov 2013.

M. Bodaghi, K. Dehghani, A. Farzadi, "fabrication of SiC/AA5052 nanocomposite by friction stir welding and the effect of successive pass on the mechanical properties,", 4th international conference on ultrafine grained and nanoStructured materails, Nov 2013.

M. Bodaghi, K. Dehghani, "Microstructural and mechanical characterization of friction stir welded AA5052 with added SiC nano particles,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

M. Bodaghi, K. Dehghani, A. Farzadi, "Fabrication of SiC/AA5052 nanocomposite by friction stir welding and the effect of successive pass on the mechanical properties,", The 4th International Biennial Conference on Ultrafine Grained and Nanostructured Materials - UFGNSM2013, Nov 2013.

Gholamreza Parvizi, Davood Harandizadeh, K. Dehghani, "The analysis of breakage of conections flexible of transportaion of gas to reduction unit of Hormozgan,", The 6th joint conference of Iranian metallurgical engineering society and Iranian foundrymen's society, Oct 2013.

S. Bakhshi, K. Dehghani, A. Khamei, "Fining of particles and uping in mechanical behaviour of Aluminium AA6061,", The sixth joinded conference of metallurgy engineers and casting scientific society of Iran, Nov 2012.

Fariborz Sharifi, Mohammad Maraghei, K. Dehghani, "Nonoindentaiton simulation of Cu Nano particle with different orientations, a molecular dynamics study,", International Congress on Nanoscience & Nanotechnology - ICNN2012, Sep 2012.

A. Aghaei, K. Dehghani, "Mechanical and Metallurgical Characterization of Friction Stir Welding of Dissimilar Monel 400 and 316 Stainless Steel,", The 9th International Conference on Trends in Welding Research, Jun 2012.

H. Alihosseini, Mohammad Asle Zaeem, K. Dehghani, "A novel cyclic forward-backward extrusion process for production of ultrafine grains materials,", TechConnect World Summit & Innovation Showcase 2012, Jun 2012.

M. Maraghei, K. Dehghani, "Molecular Dynamics Simulation of Nanoindentation on Cu Nano Particle And Extrapolating its Mechanical Behavior,", 3rd International Conference on Ultrafine Grained and Nanostructured Materials, Nov 2011.

Atiye Nekahi, K. Dehghani, "Study the corrosion behavior of nanostructured interstitial free steel,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Mohammad Hossein Musazadeh, K. Dehghani, "Study of crack propagation in nanocrystalline Ni containing different shapes and types of second phases with molecular dynamic simulation,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Karim Maraghei, K. Dehghani, "Molecular dynamics simulation of nanoindentation on Cu nano particle and extrapolating its mechanical behaviors,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Arash Heydarian, K. Dehghani, "Microstructural evolution during friction stir processing of AA7075,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Fahimeh Ali Abadi Farahani, K. Dehghani, "The effect of compressive stress on fatigue crack growth of nano-single crystal Ni using molecular dynamics simulation,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Fahimeh Ali Abadi Farahani, K. Dehghani, "The comparison of fatigue behavior of Cu with Ni in nanoscale by molecular dynamics simulation,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Kamran Kazemi, K. Dehghani, "Molecular dynamics simulation of mechanical behavior of Ni nano-wire,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Arash Heydarian, K. Dehghani, "Forming nanocomposite layer on the surface of AA7075 aluminum via friction stir processing,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

Ali Chabok, K. Dehghani, "Effect of Processing Parameters on the mechanical properties of interstitial free steel subjected to friction stir processing,", 3rd International Conference on UltraFine Grained and NonoStructured Materials-UFGNSM, Nov 2011.

A. Nekahi, K. Dehghani, "Application of Aging in Manufacturing Process of Aluminum Alloys,", The First Conference of Iranian Aircraft Structural Integrity Program (IASIP 2011), Jul 2011.

K. Dehghani, M. Ahmadi Daryakenari, "Effect of crack tip shape on the fatigue behavior of nano - copper single crystals using molecular dynamics simulation,", 1st National Conference of Nano Science & Nano Technology, Feb 2011.

K. Dehghani, M. Ahmadi Daryakenari, "Effect of crack length on fatigue behavior of nano - copper single crystals using molecular dynamics simulation,", 1st National Conference of Nano science & Nano Technology, Feb 2011.

Maryam Hosseini, K. Dehghani, A. Nekahi, "Study the corrosion behavior of nanostructured interstitial free steel,", International Congress on Nanoscience and Nanotechnology, Nov 2010.

A. Chabok, K. Dehghani, "Formation of nanograin in IF steels by friction stir processing,", 3rd International Congress on Nanoscience and Nanotechnology, Nov 2010.

M.S. Hosseini, K. Dehghani, "Study the corrosion behavior of nanostructured interstitial free steel,", International congress on Nanoscience and Nanotechnology, Nov 2010.

A. Dolatmoradi, S. Raygan, M. Asadi Rad, K. Dehghani, J. Vahdati Khaki, "Formation of nanocrystalline and ultrafine-grained structures in disk-shaped samples of Fe-0.15C and interstitial-free (IF) steels produced by ball milling,", 49th Annual Conference of Metallurgists-COM 2010, Oct 2010.

M. Mazinani, K. Dehghani, A. Chabok, "Formation of nanograin in IF steels by friction stir processing,", The 11th Iranian Conference on Manufacturing Engineering, Oct 2010.

Niloofar Kamkar Zahmatkesh, K. Dehghani, A. Nekahi, "Optimization of aging conditions of Al6110 and Al7075 using artificial neural network,", International Conference on Materials Heat Treatment-ICMH 2010, May 2010.

Niloofar Kamkar Zahmatkesh, K. Dehghani, "Prediction of bake hardenability of aluminum alloys Al6110 and Al7075 using neural network,", 139th Annual Meeting & Exhibition-TMS2010, Feb 2010.

A. Nekahi, K. Dehghani, Mohammad Ali Mohammad Mirzaie, Niloofar Kamkar Zahmatkesh, "Optimization of baking hardening of Al5052 sheet by a response surface method,", 139th Annual Meeting & Exhibition-TMS2010, Feb 2010.

Niloofar Kamkar Zahmatkesh, K. Dehghani, A. Nekahi, "Using artificial neural network to optimize the bakehardening of AL2024 and AL7075,", 139th Annual Meeting & Exhibition-TMS2010, Feb 2010.

M. Nasirizadeh, K. Dehghani, "Warm server plastic deformation to form nanostructured surface layer in IF steels,", 139th Annual Meeting & Exhibition-TMS2010, Feb 2010.

S. Yoonesian, K. Dehghani, "Comparison between properties of nano structured bake hardened Al 6056 and conventional bake hardened Al 6056,", Nov 2009.

K. Dehghani, "Comparison of fracture behavior of sharp with blunt crack tip in nanocrystalline materials by molecular dynamics simulation,", Nov 2009.

K. Dehghani, "Molecular dynamics simulation of fatigue behavior of FCC nanostructured materials,", Nov 2009.

K. Dehghani, "Formation of nanostructured surface layers in Al 7075 using surface severe plastic deformation,", Nov 2009.

K. Dehghani, "Effect of alloying elements of V and Nb on the fatigue response of thermite welding,", Nov 2009.

A. Nekahi, K. Dehghani, "Effect of alloying elements of V and Nb on the fatigue response of thermite weldiing,", Nov 2009.

, K. Dehghani, "Prediction of bake hardenability of aluminum alloys AL7075 using neural network,", Jul 2009.

K. Dehghani, "Using artificial neural network to optimize the agine behaviors and bake hardening of AL2024 and AL6110,", Apr 2009.

S. Yoonesian, K. Dehghani, "Formation of nano structured aluminum 6056 using severe plastic deformation,", Apr 2009.

K. Dehghani, "Prooerties of the nanostructured 6061 aluminum alloy produced by melt spinning,", Oct 2008.

K. Dehghani, "Corrosion behavior of interstitial free IF steels with nanocrystalline surface layers,", Oct 2008.

K. Dehghani, "Thermo mechanical treatments to produce nanostructured interstitial free IF steels,", Oct 2008.

K. Dehghani, "Formation of nanograin surface layers in interstitial free IF steels,", Oct 2008.

, K. Dehghani, "Effect of internal streses on the strength of nanocrystalline materials Inverse hall petch relaion,", Oct 2008.

M. Salehi, K. Dehghani, "Enhancement the properties of nanostructure A16061,", Jun 2008.

H. Abdollahi, K. Dehghani, "Irregularity in friction hills during the cold rolling of materials,", Apr 2008.

K. Dehghani, H. Abdollahi Khameneh, "The minimum coefficient of friction obtained by matroll software and the effect of improper friction during the cold rolling of steel,", Sep 2007.

K. Dehghani, "Fatigue crack gowth simulation for round bar with straight fronted dege crack under axial loading,", May 2007.

, N. Parvin, K. Dehghani, "The effect of Niobium on strength and ductility of high alloy TRIP steel,", Tenth National Congress of Metallurgical Eng. Society, Feb 2007.

M. Falahati Nezhad, N. Parvin, K. Dehghani, "The effect of Nb on mechanical properties of high alloy TRIP steel,", Steel Symposium 85, Feb 2007.

H. Abdollahi Khameneh, K. Dehghani, "Study friction distribution during the cold rolling of material by matroll software,", Jan 2007.

, K. Dehghani, "Dynamic nano- precipitate in IF steels,", Nov 2006.

M. Salehi, K. Dehghani, "The nanostructure of melt- spun AI6061,", Sep 2006.

N. Parvin, K. Dehghani, M. Falahati Nezhad, "Martensitic transformation of plastically deformed TRIP steel,", Ninth Iranian metallurgical engineers congress, Nov 2005.

, K. Dehghani, J. Aghazadeh Mohandesi, "Microstructural changes of x - 45 during long time servise exposure,", Sep 2005.

K. Dehghani, "dynamic strain aging in if steels,", Mar 2005.

K. Dehghani, "effect of cooling rate on the dynamic static and dynamic strain aging in IF steel,", Mar 2005.

K. Dehghani, "effect of chemical composition and cooling rate on static and dynamic strain aging in IF steels,", Mar 2005.

K. Dehghani, "A new software matroll to determine the coefficient of friction and to plot the friction hill during the cold rolling of aluminum,", Jan 2005.

K. Dehghani, Claude Allaire, "Study the microstructure changes during the creep process of aluminosilicate refractories used in aluminum industry,", May 2004.

K. Dehghani, Claude Allaire, "Evaluation of the creep behaviour of aluminosilicate refractores used in Aluminiuni Inclustry,", Jan 2000.

Taught Courses

Course title

Description

Headlines

Date

Special Topics in Mechanical Properties of Material

thermomechanical treatment

4051

Mechanical Properties of Materials lab

4051

Mechanical Properties of Materials II

4051

Mechanical Properties of Materials lab

4051

Technical Language

4051

Mechanical Properties of Materials lab

4051

Diffusion in Solids

مکانیزمهای نفوذ در جامدات و کاربرد نفوذ در مهندسی مواد

4042

Mechanical Aspects of Corrosion

آشنایی با مکانیزمهای خوردگی مکانیکی شامل خستگی خوردگی و تردی هیدروژنی

4042

Mechanical Properties of Materials lab

آشنایی عملی با اندازه گیری استحکام و خواص مکانیکی مواد

4042

Mechanical Properties of Materials lab

آشنایی عملی با اندازه گیری استحکام و خواص مکانیکی مواد

4042

Mechanical Properties of Materials lab

4041

Mechanical Properties of Materials lab

4041

Mechanical Properties of Materials II

4041

Special Topics in Mechanical Properties of Material

4041

Mechanical Properties of Materials lab

4041

Mechanical Properties of Materials lab

4032

Mechanical Properties of Materials lab

4032

Mechanical Properties of Materials lab

4032

Materials Failure Analysis Lab

4032

Mechanical Aspects of Corrosion

4032

Diffusion in Solids

4032

Inventions/Patents

Invention title

Reg. number

Country

contributers

Reg. date

Exp. date

Producing of composite in reinforced aluminium background with SiC nanoparticles with friction mixed welding

2011/12/1

2031/11/1